Best Turntable Isolation Platform

best turntable isolation platform

As simple isolation platform can do wonders to improve sound quality

Is there missing detail in the music you’re hearing?

There might be…

The ritual involved with vinyl collecting is addictive.  And at some point, our attention moves to improving the sound quality of the rigs we have.

It’s straightforward really, less vibration equals better sound.

As an Amazon Associate, I earn from qualifying purchases. Thank you! Read my disclosure for more info.

And adding something as simple as an isolation platform under your turntable can make the music more alive.

You can check out my favorite isolation platform on Amazon because it over-delivers in terms of isolation and sound quality.

Or head straight to my Comparison Table

What to Consider When Buying

There are a few things you will want to keep in mind when purchasing your isolation platform besides how much it will cost.

  • Size- You obviously want something that is going to fit your turntable nicely. If you don’t know the dimensions off the top of your head you may want to break out the tape measure to see what the W x D x H of your deck is.

Then you can find a platform that will properly fit underneath it. It won’t do any good to have an isolation platform to absorb vibration if it doesn’t sit correctly on the platform causing it to make more noise than it did, to begin with.

Also when you think about the size you want to think about the profile or height of what you are purchasing.

Where you will be placing the platform with the turntable on it could mean the difference in what platform you choose.

In other words, will the turntable and platform be on the top of your bookshelf out of the reach of jam hands? Or will you need to find a narrow place just room enough to open it up in the little corner of the house you call your own?

  • Weight- Just make sure it can hold your turntable. If you are looking at something like a foam or rubber platform you may not want your player to be too heavy as it will not be cushioned properly and could cause the platform to become deformed.
  • Footers- Some platforms come with footers and some will require them to be purchased separately. You will want to decide if footers are necessary for your set up. Some people feel adding footers is necessary because you want to be able to eke out every bit of perfect sound you possibly can.

I mean if footers can give you additional protection from someone stomping around on the floor and you not missing a beat, you have to do it.

Whether or not you need or want footers can also go back to what I mentioned above about the height of your platform. It will change the size of your set up and therefore it may require you to find a new place to put it.

  • Material- this seems to be a somewhat obvious one. Like what don’t you buy that you think about what it may be made out of? Well, an isolation platform is no different. You have options such as rubber, wood, or foam.

Choosing wood opens it up to maybe choosing between maple or walnut. Both are considered to be durable hardwoods.

Also when deciding on the material you will take into consideration how heavy it might be. Obviously, something made of solid wood is going to be heavier than something made of rubber with a cork center.

That shelf you made in woodshop in 10th grade may not hold up to something made of solid wood and your deck. But you might be able to get away with a rubber platform. So material can literally make or break your set up!

Once you have taken the above logistics into account sometimes it is really just about aesthetics. Is your deck the star, is your platform, or do they make a complimentary duo?

Best Turntable Isolation Platform

Isolation platforms don’t have to break the bank, although some of them will!  Even the most modest ones will do a great job of cleaning up the background so your music floats and stands out with detail.

So here at RPP I’ve brought together the best ones on the market for you to compare.  You can start by checking out my comparison chart to see them side by side…

Best Turntable Isolation Platform – Comparison Chart

Flip your smart device for the best view of this chart.

Product (click to see at Amazon)Price RangeMy Rating (out of 6)My Full Review
Gingko Isolation Platform $$$????? Gingko Isolation Review
Pro-Ject Isolation Platform$$???? Pro-Ject Isolation Review
Auralex Isolation Platform$???? Auralex Isolation Review
Butcher Block Acoustics Isolation Platform$????Butcher Block Isolation Review

Best Turntable Isolation Platform

Pro-Ject Groundit Deluxe II Audio  Base

Pro-Ject is well known for its outstanding turntables and accessories.  And their Deluxe II Audio Turntable Base is no different.

Folks all over audio forums sing its praises.  And for good reason…

This base is designed to be heavyweight at 23 lbs.  This hefty weight gives it excellent isolation abilities.  It’s also filled with thousands of tiny granules that improve dampening to isolate your deck.

Ultimately this means more isolation.  And fewer vibrations on your TT equals better overall sound.

The Deluxe 1 ships out with 4 adjustable spike or feet.  These are placed under the base to decouple your TT even more from the shelf it’s on.

You can set it up with either 3 or 4 feet, whatever suits your needs.

The base measures in at 435 x 45 x 340 mm.  If you add the feet it increases the height to 65 mm.  So you’ve got a lot of flexibility when it comes to space and placement.

The base is finished off with a dark grey piano finish which looks gorgeous.

This platform by Pro-Ject offers high-end isolation.  Although I think it’s pricy, to say the least.

Unless you’ve got a ton of money to throw at an isolation platform, I think you can get the same performance from something a lot more affordable.

Check out the Pro-Ject Groundit Deluxe II at Amazon

Gingko Audio Cloud 11 Vibration Control Platform

Gingko Audio Cloud 11 Vibration Control Platform for Turntables - 18"x16

Click on the image to see more information on Amazon.

The Audio Cloud 11 platform by Gingko takes things to a whole new level.

The research and development that went into the design of this 18 x 16 x 2.5 inch platform is obvious.

It looks are pretty simple.  Two platforms with a bunch of balls in between.  But looks are deceiving because this is a masterpiece…

The bottom platform has deep dimples that can hold up to 9 balls. This Cloud 11 version comes with 5 balls.

Each ball can comfortably hold 10 lbs each so this isolation platform can handle even the heaviest decks.

In fact, it’s specifically designed for the heavy VPI turntables.  But of course, you can use it for any turntable.

The top platform rests on those powerful little balls.  And this design completely decouples a turntable from its surroundings.

And from big names like Michael Fremer from Stereophile, the results are exquisite.  And I don’t doubt it for a minute.


Unless you have a state of the art turntable, or you’ve got plenty of spare cash to spend, this isolation platform is probably not worth it.

I’m not saying it’s not a great platform, because it is great.  But I’m not sure you’ll enjoy the true value of what it can do.

And there are other isolation platforms out there with a much lighter price tag that will get the job done.

Of course, that’s just my opinion.  There might be folks out there with a lower end of the high end gear that love this baby, and that’s great.

But for my modest rig and most regular rigs out there it just wouldn’t be worth the money.

Check out the Gingko Audio Cloud 11 at Amazon

Butcher Block Acoustics Isolation Platform

Butcher Block Acoustics Audio Isolation Platform - Edge Grain (18" x 15

Click on the image to see more information on Amazon.

The isolation platform by Butcher Block Acoustics may look like it belongs in the kitchen but don’t be confused. 

Hardwood is durable and known to act as a natural absorber of the energy that causes vibration. That means it doesn’t disappoint as an isolation platform for your record player. Making it a great option for audiophiles. 

Being made of solid wood with dimensions of 18x15x3 (give or take a bit depending on your choice) makes this platform a sturdy piece of work. 

This acoustic platform is produced in the USA by Wood Welded Companies. They have acres of space to allow the wood to air dry and season properly. This helps Wood Welded put the same craftsmanship into their acoustics that you would find in their kitchen products.

Its looks are pretty and simple. You can choose an isolation platform made of maple or of walnut. 

Either wood choice has a Durakryl 102 satin finish. This is a standard finish for Wood Welded wood products. This finish allows it to resist marring and moisture while cleaning easily with warm soapy water.

Both the maple or walnut blocks have an edge grain lamination. The laminated edges come together in unique patterns. The walnut is obviously darker than the maple so the decision is yours based on which goes better with your turntable.

Even though it is a solid piece of wood that naturally dissipates energy it also comes with anti-vibration pads. Footers can be purchased as accessories for the Butcher Block. This allows you a little customization as you can pick out the footers you want to go with your interior design.

Check out the Butcher Block at Amazon

Auralex Acoustics Turntable Isolation Platform

The Auralex Acoustics isolation platform is by far my favorite choice for turntables.  And it’s the best priced one too.

The platform is made up of an MDF platform that is well known for its acoustic abilities.  But it doesn’t stop there…

The MDF is covered with a material called Ozite.  Ozite is used in flooring products for its isolation properties.

Which makes it a great material for an isolation platform too.

The Ozite covered MDF is supported by a 1-inch thick ‘Platform’.

This design is made to separate your turntable from the shelf or stand you have it sitting on.

And if you’re strapped for space and have your TT sitting on your speakers this isolation platform is an absolute must.

According to Auralex the weight capacity of their isolation platform is 300 lbs.  So there’s no way it’ll collapse under the weight of your TT.

And if your deck stands on spiked feet they won’t make a dent in the isolation board.

The Auralex has decent dimensions of 14.2 x 17.5 x 2 inches.  So it’ll hold just about any sized turntable comfortably.

There aren’t many affordable isolation platforms that are also high quality.  But the Auralex fits the bill in both categories.

It’s not the most attractive looking platform.  But it’s by far my favorite pick as the best turntable isolation platform.

Check out the Aurolex at Amazon

Good Vibrations Turntable Isolation Pad

The Good Vibrations Turntable Isolation Pad is the lowest profile product on this list.

At only ¼” thick it doesn’t stick up too much from your shelf. Allowing you to put your turntable in a narrower spot than maybe some of the other isolation pads on this list.

Don’t let the low profile deter you, we all know it is really about the right material!

Both the upper and lower surface of this pad is made of natural textured rubber. Not only does the rubber help with the sound it also prevents slipping. Then there is a dense fiber center to keep it sturdy.

Having the rubber and fiber combined helps prevent turntable movement, feedback, and vibrations. This lets you turn up the volume without losing the music to distortion or other audio annoyances.

Also since this isolation pad is made of rubber you don’t have to worry about it sticking to surfaces, discoloring them or even damaging them like some isolation pads.

Good Vibrations is a Veteran owned USA company. So you can support those who have served and help the US economy. Win-Win!

Personally, I think the best design element is, really the only design, is the low profile. The pad will just slide under your turntable and doesn’t draw attention to itself.

Unlike the Butcher block above, which is a masterpiece of its own, this rubber pad will let your turntable be the star it is meant to be.

This product is also audiophile approved so you know that they are taking the sound of your music as seriously as you do!

Check out the Good Vibrations at Amazon

My Favorite Picks

Besides a decent deck, a cartridge that performs well, and half-decent speakers, improving the sound quality of your rig is pretty darn easy.

An isolation platform doesn’t have to cost the earth and even the most affordable ones do a fine job.

My First choice is the isolation platform from Gingko.  I rated well because I love the fact that it’s made from such high quality material so it’s acoustic abilities outdoes the Auralex.  And it looks beautiful.  Of course, this comes at a slightly higher price.  But if you have the extra greenbacks this is a great choice.

My second choice is the Auralex Isolation Platform.  I think it’s the perfect balance between price and performance.  Although I rated it VERY good but not perfect— I don’t think it’s particularly nice looking.  But your TT will cover up it’s basic look.

The Pro-Ject platforms are excellent.  Although I think they are pretty pricey for a regular rig setup.

Now that you know what’s out there and how each one performs, you can pick the best turntable isolation platform to suit your specific needs and won’t make your wallet sweat.

Are you in the market for a new TT?  Check out my review of the best ones under 400 bucks.

Or, if you’re looking for an affordable high performing cartridge check out the best ones for the money.

If you’ve got the extra cash to spend and looks are important to you then this isolation platform should be on your radar.

Frequently Asked Question

What does a turntable isolation platform do? 

Isolation platforms work to isolate the turntable. It helps to control vibrations that could negatively impact sound quality and performance. This works by decoupling the system from the floor and the speakers.

Do I need an isolation platform?

Yes! If you don’t isolate the turntable from the floor when you walk or get up and groove to your music you could cause the turntable to skip. Many feel using an isolation platform is crucial no matter the circumstances, believing that even marginal resonance can impact your sound.

1 comment… add one
  • I just bought a Music Hall MMF 7-3 and want to “add isolation stacks” to it for aesthetic reasons (to look more like a 9.3 or 11.3) and of course , it can’t hurt to provide even more isolation that is already engineered into the stock product. What say you.?

Leave a Comment

Cancel reply